DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
377
Figure 13-11 Log Backup to TFTP window
The fields that can be configured are described below:
Parameter Description
TFTP Server IP Enter the TFTP server’s IP address here. When select the IPv4 option,
enter the IPv4 address of the TFTP server in the space provided.
When the IPv6 option is selected, enter the IPv6 address of the TFTP
server in the space provided.
Destination URL
Enter the destination path and location where the log file should be
stored on the TFTP server. This field can be up to 64 characters long.
Log Type
Select the log type that will be backed up to the TFTP server. When
the System Log option is selected, the system log will be backed up.
When the Attack Log is selected, the attack log will be backed up.
Click the Backup button to initiate the system log backup.
Ping
Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination
node then responds to or “echoes” the packets sent from the Switch. This is very useful to verify
connectivity between the Switch and other nodes on the network.
To view the following window, click Tools > Ping, as shown below:
Figure 13-12 Ping window
The fields that can be configured for IPv4 Ping are described below:
Parameter Description
To Next Page
Loading...
