DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
24
Figure 3-16 System Log Discriminator Settings window
The fields that can be configured are described below:
Parameter Description
Discriminator
Enter the discriminator name here. This name can be up to 15
characters long.
Facility
Select the facility’s behavior option and the type of facility that will be
associated with the selected behavior here. Behavior options to
choose from are Drops and Includes.
Severity
Select the severity behavior option and the value of the type of
information that will be logged. Behavior options to choose from are
Drops and Includes. Severity value options to choose from are 0
(Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5
(Notifications), 6 (Informational), and 7 (Debugging).
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
System Log Server Settings
This window is used to view and configure system log’s server settings.
To view the following window, click System > System Log > System Log Server Settings, as shown
below:
To Next Page
Loading...
