D-Link DGS-1510 Series - SSL Service Policy

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
352
Click the Delete button to remove the specified entry.
SSL Service Policy
This window is used to view and configure the SSL service policy settings.
To view the following window, click Security > SSL > SSL Service Policy, as shown below:
Figure 9-93 SSL Service Policy window
The fields that can be configured are described below:
Parameter Description
Policy Name
Enter the SSL service policy name here. This name can be up to 32
characters long.
Session Cache Timeout
Enter the session cache timeout value used here. This value must be
between 60 and 86400 seconds. By default, this value is 600 seconds.
Secure Trustpoint
Enter the secure trust point’s name here. This name can be up to 32
characters long.
Cipher Suites
Select the cipher suites that will be associated with this profile here.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specified entry.