DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
71
Group Name
Enter a group name. This is optional. This name is used to segment
switches into different SIM groups.
Click the Apply button to accept the changes made.
The fields that can be configured for SIM Settings are described below:
Parameter Description
Traps State
Select to enable or disable the SIM trap state.
Interval
Enter the interval in seconds. The range is from 30 to 90.
Hold Time
Enter the hold-time in seconds. The range is from 100 to255.
Management VLAN
Enter the single IP management message VLAN ID.
Click the Apply button to accept the changes made.
After enabling the Switch to be a Commander Switch (CS), the Single IP Management folder will then
contain four added links to aid the user in configuring SIM through the web, including Topology,
Firmware Upgrade, Configuration Backup/Restore and Upload Log File.
Topology
This window is used to configure and manage the Switch within the SIM group and requires Java script to
function properly on your computer.
To view the following window, click Management > Virtual Stacking (SIM) > Topology, as shown below:
To Next Page
Loading...
