DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
129
LLDP Management Address List
This window is used to view the LLDP management address list.
To view the following window, click L2 Features > LLDP > LLDP Management Address List, as shown
below:
Figure 5-52 LLDP Management Address List window
The fields that can be configured are described below:
Parameter Description
All/IPv4/IPv6 Select the subtype. Options to choose from are All, IPv4 and IPv6.
Click the Find button to locate a specific entry based on the information entered.
LLDP Basic TLVs Settings
Type-length-value (TLV) allows the specific sending information as a TLV element within LLDP packets.
This window is used to enable the settings for the Basic TLVs Settings. An active LLDP port on the
Switch always included mandatory data in its outbound advertisements. There are four optional data
types that can be configured for an individual port or group of ports to exclude one or more of these data
types from outbound LLDP advertisements. The mandatory data type includes four basic types of
information (end of LLDPDU TLV, chassis ID TLV, port ID TLV, and Time to Live TLV). The mandatory
data types cannot be disabled. There are also four data types which can be optionally selected. These
include Port Description, System Name, System Description and System Capability.
To view the following window, click L2 Features > LLDP > LLDP Basic TLVs Settings, as shown below:
To Next Page
Loading...
