DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
271
Figure 8-103 ACL Interface Access Group window
The fields that can be configured are described below:
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
Direction Select the direction here. Option to choose from is In.
Action
Select the action that will be taken here. Options to choose from are
Add and Delete.
Type Select the ACL type here. Options to choose from are IP ACL, IPv6
ACL, MAC ACL, and Expert ACL.
ACL Name
Enter the ACL profile’s name here. This name can be up to 32
characters long.
Click the Please Select button to choose the ACL profile that has been created.
Click the Apply button to accept the changes made.
ACL VLAN Access Map
This window is used to view and configure the ACL VLAN access map settings.
To view the following window, click ACL > ACL VLAN Access Map, as shown below:
To Next Page
Loading...
