DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
351
The fields that can be configured for Import File are described below:
Parameter Description
File Select
Select the file type that will be loaded here. Options to choose from are
Certificate and Private Key. After selecting the file type, browse to the
appropriate file, located on the local computer, by pressing the
Browse button.
Destination File Name
Enter the destination file name used here. This name can be up to 32
characters long.
Click the Apply button to accept the changes made.
Crypto PKI Trustpoint
This window is used to view and configure the crypto PKI trust point settings.
To view the following window, click Security > SSL > Crypto PKI Trustpoint, as shown below:
Figure 9-92 Crypto PKI Trustpoint window
The fields that can be configured are described below:
Parameter Description
Trustpoint
Enter the name of the trust-point that is associated with the imported
certificates and key pairs here. This name can be up to 32 characters
long.
File System Path
Enter the file system path for certificates and key pairs here.
Password
Enter the encrypted password phrase that is used to undo encryption
when the private keys are imported here. The password phrase is a
string of up to 64 characters. If the password phrase is not specified,
the NULL string will be used.
TFTP Server Path
Enter the TFTP server’s path here.
Type
Select the type of certificate that will be imported here. Options to
choose from are Both, CA, and Local. Selecting Both specifies to
import the CA certificate, local certificate and key pairs. Selecting CA
specifies to import the CA certificate only. Selecting Local specifies to
import local certificate and key pairs only.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
To Next Page
Loading...
