D-Link DGS-1510 Series - Cos to Queue Mapping; Port Rate Limiting

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
152
and 127.
Click the Apply button to accept the changes made.
CoS to Queue Mapping
This window is used to view and configure the CoS-to-Queue mapping settings.
To view the following window, click QoS > Basic Settings > CoS to Queue Mapping, as shown below:
Figure 7-4 CoS to Queue Mapping window
The fields that can be configured are described below:
Parameter Description
Queue ID
Select the queue ID that will be mapped to the corresponding CoS
value. Options to choose from are 0 to 7.
Click the Apply button to accept the changes made.
Port Rate Limiting
This window is used to view and configure the port rate limiting settings.
To view the following window, click QoS > Basic Settings > Port Rate Limiting, as shown below: