DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
202
Flow Label
Enter the flow label value here. This value must be between 0 and
1048575.
Time Range
Enter the name of the time range to associate with this ACL rule.
Action
Select the action that this rule will take here. Options to choose from
are Permit and Deny.
Click the Back button to return to the previous window.
Click the Next button to continue.
After clicking the Next button, the following window will appear.
Figure 8-29 ACL Configuration Wizard (Apply Port) window
The fields that can be configured are described below:
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
Direction Select the direction here. Option to choose from is In.
Click the Back button to return to the previous window.
Click the Apply button to accept the changes made.
ACL Access List
This window is used to view and configure the ACL access list settings.
To view the following window, click ACL > ACL Access List, as shown below:
Figure 8-30 ACL Access List window
The fields that can be configured are described below:
To Next Page
Loading...
