D-Link DGS-1510 Series - Network Access Authentication Global Settings

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
333
To view the following window, click Security > Network Access Authentication > Guest VLAN, as
shown below:
Figure 9-73 Guest VLAN window
The fields that can be configured are described below:
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
VID
Enter the VLAN ID used here. This value must be between 1 and
4094.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Network Access Authentication Global Settings
This window is used to view and configure the network access authentication global settings.
To view the following window, click Security > Network Access Authentication > Network Access
Authentication Global Settings, as shown below:
Figure 9-74 Network Access Authentication Global Settings window