DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
369
Click the Apply button to accept the changes made for each individual section.
Click the Delete button to remove the specified entry.
NOTE: The hibernation feature can only be configured when physical stacking is disabled on
this switch.
After clicking the Power Saving Shutdown Settings tab, the following page will appear.
Figure 12-2 Power Saving Shutdown Settings window
The fields that can be configured are described below:
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
Time Range
Enter the name of the time range to associated with the ports.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
EEE
Energy Efficient Ethernet (EEE) is defined in IEEE 802.3az. It is designed to reduce the energy
consumption of a link when no packets are being sent.
To view the following window, click Green > EEE, as shown below:
To Next Page
Loading...
