DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
20
Figure 3-12 PoE Statistics window
The fields that can be configured are described below:
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.
Click the Clear All button to clear PoE statistics for all ports.
Click the Clear button to clear the PoE statistics for the corresponding port.
PoE Measurement
This window is used to display the PoE measurement.
To view the following window, click System > PoE > PoE Measurement, as shown below:
To Next Page
Loading...
