D-Link DGS-1510 Series - Dhcp; Service DHCP; DHCP Class Settings

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
49
check box to return to the default setting. The value is from 60 to
36000 seconds. The default value is 180 seconds.
Console Session Timeout Enter the time in minutes of the web session timeout. Tick the Default
check box to return to the default setting. The value is from 0 to 1439
minutes. 0 means never timeout. The default value is 3 minutes.
Telnet Session Timeout
Enter the time in minutes of the Telnet session timeout. Tick the
Default check box to return to the default setting. The value is from 0
to 1439 minutes. 0 means never timeout. The default value is 3
minutes.
SSH Session Timeout Enter the time in minutes of the SSH session timeout. Tick the Default
check box to return to the default setting. The value is from 0 to 1439
minutes. 0 means never timeout. The default value is 3 minutes.
Click the Apply button to accept the changes made.
DHCP
Service DHCP
This window is used to configure the DHCP relay service on the Switch.
To view the following window, click Management > DHCP > Service DHCP, as shown below:
Figure 4-23 Service DHCP window
The fields that can be configured for Service DHCP are described below:
Parameter Description
Service DHCP State
Select this option to enable or disable the DHCP relay service.
Click the Apply button to accept the changes made.
The fields that can be configured for Service IPv6 DHCP are described below:
Parameter Description
Service IPv6 DHCP State
Select this option to enable or disable the IPv6 DHCP relay service.
Click the Apply button to accept the changes made.
DHCP Class Settings
This window is used to configure and display the DHCP class and the DHCP option matching pattern for
the DCHP class.
To view the following window, click Management > DHCP > Service DHCP, as shown below: