DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
50
Figure 4-24 DHCP Class Settings window
The fields that can be configured are described below:
Parameter Description
Class Name
Enter the DHCP class name with a maximum of 32 characters.
Click the Apply button to accept the changes made.
Click the Edit button to modify the DHCP option matching pattern for the corresponding DCHP class.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following window will appear.
Figure 4-25 DHCP Class Option Settings window
The fields that can be configured are described below:
Parameter Description
Option
Enter the DHCP option number. The range is from 1 to 255.
Hex Enter the hex pattern of the specified DHCP option. Tick the * check
box not to match the remaining bits of the option.
Bitmask
Enter the hex bit mask for masking of the pattern. The masked pattern
bits will be matched. If not specified, all bits entered in Hex will be
checked.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
To Next Page
Loading...
