DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
32
Figure 4-1 User Management Settings window
The fields that can be configured are described below:
Parameter Description
User Name
Enter the user account name here. This name can be up to 32
characters long.
Privilege
Enter the privilege level for this account here. This value must be
between 1 and 15.
Password Type
Select the password type for this user account here. Options to choose
from are None, Plain Text, and Encrypted.
Password After selecting either Plain Text or Encrypted as the password type,
enter the password for this user account here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified user account entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Session Table tab, the following page will appear.
Figure 4-2 Session Table window
A list of active user account session will be displayed.
Password Encryption
This window is used to configure whether to save the encryption of the password in the configuration file.
To view the following window, click Management > Password Encryption, as shown below:
To Next Page
Loading...
