D-Link DGS-1510 Series - MAC Authentication

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
321
Shutdown – Shut down the port when the port enters under attack
state.
Click the Apply button to accept the changes made.
MAC Authentication
This window is used to view and configure the MAC authentication settings. MAC authentication is a
feature designed to authenticate a user by MAC address when the user is trying to access the network
via the Switch. The Switch itself can perform the authentication based on a local database or be a
RADIUS client and perform the authentication process via the RADIUS protocol with a remote RADIUS
server.
To view the following window, click Security > MAC Authentication, as shown below:
Figure 9-63 Port Security Global Settings window
The fields that can be configured for MAC Authentication Global Settings are described below:
Parameter Description
MAC Authentication State
Select to enable or disable the MAC authentication feature’s global
state.
MAC Authentication Trap
State
Select to enable or disable the MAC authentication feature’s trap state.
Click the Apply button to accept the changes made.