D-Link DGS-1510 Series - DHCP Relay

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
51
DHCP Relay
DHCP Relay Global Settings
This window is used to configure the smart relay feature of the DHCP relay agent.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Global
Settings, as shown below:
Figure 4-26 DHCP Relay Global Settings window
The fields that can be configured are described below:
Parameter Description
DCHP Smart Relay State
Select this option to enable or disable the DHCP smart relay.
Click the Apply button to accept the changes made.
DHCP Relay Pool Settings
This window is used to configure and display the DHCP relay pool on a DHCP relay agent.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Pool Settings,
as shown below:
Figure 4-27 DHCP Relay Pool Settings window
The fields that can be configured are described below:
Parameter Description
Pool Name
Enter the address pool name with a maximum of 32 characters.
Click the Apply button to accept the changes made.
Click the Edit button to modify the corresponding information of the specific DHCP pool.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button under Source, the following window will appear.