DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
203
Parameter Description
ACL Type
Select the ACL profile type to find here. Options to choose from are
All, IP ACL, IPv6 ACL, MAC ACL, and Expert ACL.
ID
Enter the ACL ID here. The range is from 1 to 14999.
ACL Name
Enter the ACL name here. This name can be up to 32 characters long.
Click the Find button to locate a specific entry based on the information entered.
Click the Add ACL button to create a new ACL profile.
Click the Clear All Counter button to clear all the counter information displayed.
Click the Clear Counter button to clear the counter information for the rule displayed.
Click the Add Rule button to create an ACL rule for the ACL profile selected.
Standard IP ACL
After clicking the Add ACL button, users can create a new ACL profile, as shown below:
Figure 8-31 Standard IP ACL (Add ACL Access List) window
The fields that can be configured are described below:
Parameter Description
ACL Type Select the ACL profile type here. Options to choose from are Standard
IP ACL, Extended IP ACL, Standard IPv6 ACL, Extended IPv6
ACL, Extended MAC ACL, and Extended Expert ACL.
ID
Enter the ACL ID from 1 to 1999.
ACL Name
Enter the ACL profile’s name here. This name can be up to 32
characters long.
Click the Apply button to create the new ACL profile.
After creating a Standard IP ACL profile, the newly created Standard IP ACL profile will be displayed in
the ACL profile display table, as shown below:
To Next Page
Loading...
