DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
10
Figure 3-2 System Information Settings window
The fields that can be configured are described below:
Parameter Description
System Name
Enter a system name for the Switch, if so desired. This name will
identify it in the Switch network.
System Location
Enter the location of the Switch, if so desired. This string can be up to
255 characters long.
System Contact
Enter a contact name for the Switch, if so desired. This string can be
up to 255 characters long.
Click the Apply button to accept the changes made.
Peripheral Settings
This window is used to configure the environment trap settings and environment temperature threshold
settings.
To view the following window, click System > Peripheral Settings, as shown below:
Figure 3-3 Peripheral Settings window
The fields that can be configured are described below:
Parameter Description
Fan Trap
Click to enable or disable the fan trap state for waning fan event (fan
failed or fan recover).
Power Trap
Click to enable or disable the power trap state for waning power event
(power failed or power recover).
Temperature Trap
Click to enable or disable the temperature trap state for waning
temperature event (temperature exceeds the thresholds or
temperature recover).
To Next Page
Loading...
