D-Link DGS-1510 Series - Radius; RADIUS Global Settings

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
292
Figure 9-25 AAA Accounting Exec window
The fields that can be configured are described below:
Parameter Description
List Name
Enter the method list name that will be used with the AAA accounting
EXEC option here.
Method 1 to 4
Select the method lists that will be used for this configuration here.
Options to choose from are none, group, radius, and tacacs+.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
After clicking the AAA Accounting Commands tab, the following page will appear.
Figure 9-26 AAA Accounting Commands window
The fields that can be configured are described below:
Parameter Description
Level
Select the privilege level used here. Options to choose from are levels
1 to 15.
List Name
Enter the method list name that will be used with the AAA accounting
commands option here.
Method
Select the method lists that will be used for this configuration here.
Options to choose from are none, group, and tacacs+.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
RADIUS
RADIUS Global Settings
This window is used to view and configure the RADIUS global settings.
To view the following window, click Security > RADIUS > RADIUS Global Settings, as shown below: