D-Link DGS-1510 Series - Appendix B - Trap Entries

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
407
Appendix B - Trap Entries
The following table lists all possible trap log entries and their corresponding meanings that will appear in
the switch.
802.1X
Trap Name Description OID
dDot1xExtLoggedSuccess The trap is sent when a host has successfully logged
in (passed 802.1X authentication).
Binding objects:
(1) ifIndex
(2) dnaSessionClientMacAddress
(3) dnaSessionAuthVlan
(4) dnaSessionAuthUserName
1.3.6.1.4.1.17
1.14.30.0.1
dDot1xExtLoggedFail The trap is sent when a host failed to pass 802.1X
authenitcation (login failed).
Binding objects:
(1) ifIndex
(2) dnaSessionClientMacAddress
(3) dnaSessionAuthVlan
(4) dnaSessionAuthUserName
(5) dDot1xExtNotifyFailReason
1.3.6.1.4.1.17
1.14.30.0.2
Authentication Fail
Trap Name Description OID
authenticationFailure An authenticationFailure trap signifies that the
SNMPv2 entity, acting in an agent role, has received
a protocol message that is not properly
authenticated. While all implementations of the
SNMPv2 must be capable of generating this trap, the
snmpEnableAuthenTraps object indicates whether
this trap will be generated.
1.3.6.1.6.3.1.
1.5.5
BPDU Attack Protection
Trap Name Description OID
dBpduProtectionAttackOccur This trap is sent when the BPDU attack happened on
an interface.
Binding objects:
(1) ifIndex
(2) dBpduProtectionIfCfgMode
1.3.6.1.4.1.17
1.14.47.0.1
dBpduProtectionAttackRecover This trap is sent when the BPDU attack recovered on
an interface.
Binding objects:
(1) ifIndex
1.3.6.1.4.1.17
1.14.47.0.2