D-Link DGS-1510 Series - Session Timeout

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
48
Figure 4-21 Telnet/Web window
The fields that can be configured for Telnet Settings are described below:
Parameter Description
Telnet State
Select this option to enable or disable the configuration through Telnet.
Port
Enter the TCP port number used for Telnet management of the Switch.
The “well-known” TCP port for the Telnet protocol is 23.
Click the Apply button to accept the changes made.
The fields that can be configured for Web Setting are described below:
Parameter Description
Web State
Select this option to enable or disable the configuration through the
web.
Port
Enter the TCP port number used for Telnet management of the Switch.
The “well-known” TCP port for the Telnet protocol is 80.
Click the Apply button to accept the changes made.
Session Timeout
This window is used to configure the session timeout.
To view the following window, click Management > Session Timeout, as shown below:
Figure 4-22 Session Timeout window
The fields that can be configured are described below:
Parameter Description
Web Session Timeout Enter the time in seconds of the web session timeout. Tick the Default