DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
167
and 7. This overwrites the original CoS queue selection.
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
After clicking the Policer button, the following window will appear.
Figure 7-19 Police Action window
The fields that can be configured are described below:
Parameter Description
None
Select this option to match nothing to this policy map.
Specify
Select the option to match something to this policy map.
Average Rate
Enter the average rate in kilobits per second.
Normal Burst Size
Enter the normal burst size in kilobytes.
Maximum Burst Size
Enter the maximum burst in kilobytes.
Conform Action
Select the action to take on green color packets. Options to choose
from are Drop, Set-DSCP-Transmit, Set-1P-Transmit, Transmit, and
Set-DSCP-1P.
Exceed Action
Select the action to take on yellow color packets. Options to choose
from are Drop, Set-DSCP-Transmit, Set-1P-Transmit, Transmit, and
Set-DSCP-1P.
Violate Action
Select the action to take on red color packets. Options to choose from
are None, Drop, Set-DSCP-Transmit, Set-1P-Transmit, Transmit,
and Set-DSCP-1P.
Color Aware
Select this option to enable or disable color aware mode.
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
Policy Binding
This window is used to view and configure the policy binding settings.
To Next Page
Loading...
