DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
168
To view the following window, click QoS > Advanced Settings > Policy Binding, as shown below:
Figure 7-20 Policy Binding window
The fields that can be configured are described below:
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
Direction Select the direction option here. Option to choose from is Input. Input
represents Input specified ingress traffic.
Policy Map Name
Enter the policy map name here. This name can be up to 32
characters long. Select the None option to not tie a policy map to this
entry.
Click the Apply button to accept the changes made.
To Next Page
Loading...
