DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
118
Figure 5-42 IGMP Snooping Statistics Settings window
The fields that can be configured for IGMP Snooping Statistics Settings are described below:
Parameter Description
Statistics Select the interface here. Options to choose from are All, VLAN, and
Port.
VID Enter a VLAN ID between 1 and 4094. This is available when VLAN is
selected in the Statistics drop-down list.
Unit
Select the switch unit that will be used for this configuration here. This
is available when Port is selected in the Statistics drop-down list.
From Port / To Port
Select the appropriate port range used for the configuration here. This
is available when Port is selected in the Statistics drop-down list.
Click the Clear button to clear the IGMP snooping related statistics.
The fields that can be configured for IGMP Snooping Statistics Table are described below:
Parameter Description
Find Type Select the interface type. Options to choose from are VLAN, and Port.
VID Enter a VLAN ID between 1 and 4094. This is available when VLAN is
selected in the Find Type drop-down list.
Unit
Select the switch unit that will be used for this configuration here. This
is available when Port is selected in the Find Type drop-down list.
From Port / To Port
Select the appropriate port range used for the configuration here. This
is available when Port is selected in the Find Type drop-down list.
Click the Find button to locate a specific entry based on the information entered.
Click the Find All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
MLD Snooping
Multicast Listener Discovery (MLD) Snooping is an IPv6 function used similarly to IGMP snooping in IPv4.
It is used to discover ports on a VLAN that are requesting multicast data. Instead of flooding all ports on a
selected VLAN with multicast traffic, MLD snooping will only forward multicast data to ports that wish to
To Next Page
Loading...
