DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
99
Figure 5-24 Voice VLAN Port window
The fields that can be configured are described below:
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
State
Select this option to enable or disable the state of the port.
Mode Select the mode of the port. Options to choose from are Auto
Untagged, Auto Tagged, and Manual.
Click the Apply button to accept the changes made.
Voice VLAN OUI
This window is used to configure the user-defined voice traffic’s OUI. The OUI is used to identify the voice
traffic. There are a number of pre-defined OUIs. The user can further define the user-defined OUIs if
needed. The user-defined OUI cannot be the same as the pre-defined OUI.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN OUI, as show
below:
To Next Page
Loading...
