DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
5
Figure 2-3 System IP Information window
The fields that can be configured are described below:
Parameter Description
Static
Select this option to manually configure and use IP address settings on
this switch.
DHCP
Select this option to obtain IP address settings from a DHCP server.
IP Address
Enter the IP address of the Switch here.
Netmask
Select the Netmask option here.
Gateway
Enter the default gateway IP address here.
Tick the Ignore the wizard next time option to skip the Smart Wizard on the next login.
Click the Exit button to discard the changes made, exit the Smart Wizard, and continue to the Web UI.
Click the Next button to accept the changes made and continue to the next step.
Step 2 – SNMP Settings
In this window, the user can enable or disable the SNMP function.
To Next Page
Loading...
