DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
141
The fields that can be configured are described below:
Parameter Description
Interface VLAN
Enter the interface’s VLAN ID here. This value must be between 1 and
4094.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following window will be available.
Figure 6-7 IPv4 Interface Configure window
Click the Back button to return to the previous window.
The field that can be configured for Settings is described below:
Parameter Description
State
Select this option to enable or disable the IPv4 interface’s global state.
Click the Apply button to accept the changes made.
The fields that can be configured for IP Settings are described below:
Parameter Description
Get IP From Select the get IP from option here. Options to choose from are Static
and DHCP. When the Static option is selected, users can enter the
IPv4 address of this interface manually in the fields provided. When
the DHCP option is selected, this interface will obtain IPv4 information
automatically from the DHCP server located on the local network.
IP Address
Enter the IPv4 address for this interface here.
To Next Page
Loading...
