DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
145
Figure 6-12 IPv6 Interface - Detail, IPv6 Interface Settings window
The fields that can be configured for Interface are described below:
Parameter Description
IPv6 State
Select to enable or disable the IPv6 interface’s global state here.
Click the Back button to return to the previous window.
Click the Apply button to accept the changes made.
The fields that can be configured for Static IPv6 Address Settings are described below:
Parameter Description
IPv6 Address Enter the IPv6 address for this IPv6 interface here. Select the EUI-64
option to configure an IPv6 address on the interface using the EUI-64
interface ID. Select the Link Local option to configure a link-local
address for the IPv6 interface.
Click the Apply button to accept the changes made.
The fields that can be configured for NS Interval Settings are described below:
Parameter Description
NS Interval
Enter the NS interval between 0 and 3600000 milliseconds.
Click the Apply button to accept the changes made.
After clicking the Interface Address tab, at the top of the page, the following page will be available.
Figure 6-13 IPv6 Interface - Detail, Interface IPv6 Address window
Click the Delete button to delete the specified entry.
After clicking the DHCPv6 Client tab, at the top of the page, the following page will be available.
To Next Page
Loading...
