DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
316
IPv6 Neighbor Binding
This window is used to view and configure the IPv6 neighbor binding settings.
To view the following window, click Security > IMPB > IPv6 > IPv6 Source Guard > IPv6 Neighbor
Binding, as shown below:
Figure 9-58 IPv6 Neighbor Binding window
The fields that can be configured for IPv6 Neighbor Binding Settings are described below:
Parameter Description
MAC Address
Enter the MAC address used here.
VID
Enter the VLAN ID used here. This value must be between 1 and
4094.
IPv6 Address
Enter the IPv6 address used here.
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
Click the Apply button to accept the changes made.
The fields that can be configured for IPv6 Neighbor Binding Entry are described below:
Parameter Description
Unit
Select the switch unit that will be used for this search here.
From Port / To Port
Select the appropriate port range used for the search here.
IPv6 Address
Enter the IPv6 address to find here.
MAC Address
Enter the MAC address to find here.
VID
Enter the VLAN ID to find here.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
To Next Page
Loading...
