DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
343
Figure 9-83 Storm Control window
The fields that can be configured for Storm Control Trap Settings are described below:
Parameter Description
Trap State
Select the storm control trap option here. Options to choose from are
None, Storm Occur, Storm Clear, and Both. When None is selected,
no traps will be sent. When Storm Occur is selected, a trap
notification will be sent when a storm event is detected. When Storm
Clear is selected, a trap notification will be sent when a storm event is
cleared.
Click the Apply button to accept the changes made.
The fields that can be configured for Storm Control Polling Settings are described below:
Parameter Description
Interval
Enter the interval value used here. This value must be between 5 and
600 seconds. By default, this value is 5 seconds.
Retries
Enter the retries value used here. This value must be between 0 and
360. By default, this value is 3. Tick the Infinite option to disable this
feature.
Click the Apply button to accept the changes made.
The fields that can be configured for Storm Control Port Settings are described below:
Parameter Description
To Next Page
Loading...
