DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
412
trap is sent by a bridge soon after its election as the
new root, e.g., upon expiration of the Topology
Change Timer, immediately subsequent to its
election. Implementation of this trap is optional.
topologyChange A topologyChange trap is sent by a bridge when any
of its configured ports transitions from the Learning
state to the Forwarding state, or from the Forwarding
state to the Blocking state. The trap is not sent if a
newRoot trap is sent for the same transition.
Implementation ofthis trap is optional
1.3.6.1.2.1.17
.0.2
Peripheral
Trap Name Description OID
dEntityExtPowerStatusChg Power Status change notification.
Binding objects:
(1) dEntityExtEnvPowerUnitId
(2) dEntityExtEnvPowerIndex
(3) dEntityExtEnvPowerStatus
1.3.6.1.4.1.17
1.14.5.0.3
dEntityExtFanStatusChg Fan status change notification.
Binding objects:
(1) dEntityExtEnvFanUnitId
(2) dEntityExtEnvFanIndex
(3) dEntityExtEnvFanStatus
1.3.6.1.4.1.17
1.14.5.0.1
dEntityExtThermalStatusChg Temperature status change notification.
Binding objects:
(1) dEntityExtEnvTempUnitId
(2) dEntityExtEnvTempIndex
(3) dEntityExtEnvTempStatus
1.3.6.1.4.1.17
1.14.5.0.2
dEntityExtFactoryResetButton Press factory reset button notification
Binding objects:
(1) dEntityExtUnitIndex
1.3.6.1.4.1.17
1.14.5.0.5
PoE
Trap Name Description OID
pethMainPowerUsageOnNotifica
tion
This trap indicates PSE Threshold usage indication is
on, the usage power is above the threshold. At least
500 msec must elapse between notifications being
emitted by the same object instance.
Binding objects:
(1) pethMainPseConsumptionPower
1.3.6.1.2.1.10
5.0.2
pethMainPowerUsageOffNotifica
tion
This trap indicates PSE Threshold usage indication is
off, the usage power is below the threshold. At least
500 msec must elapse between notifications being
emitted by the same object instance.
Binding objects:
(1) pethMainPseConsumptionPower
1.3.6.1.2.1.10
5.0.3
To Next Page
Loading...
