DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
53
Figure 4-30 DHCP Relay Pool Class Settings window
The fields that can be configured are described below:
Parameter Description
Class Name
Select the DHCP class name.
Click the Apply button to accept the changes made.
Click the Edit button to edit more information.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
After clicking the Edit button, the following window will appear.
Figure 4-31 DHCP Relay Pool Class Edit Settings window
The fields that can be configured are described below:
Parameter Description
Relay Target
Enter the DHCP relay target for relaying packets that matches the
value pattern of the option defined in the DHCP class.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
DHCP Relay Information Settings
This window is used to configure and display the DHCP relay information.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Information
Settings, as shown below:
To Next Page
Loading...
