D-Link DGS-1510 Series - Page 89

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
81
Parameter Description
D-Link Discovery Protocol
State
Select this option to enable or disable DDP global state.
Report Timer
Select the interval in seconds between two consecutive DDP report
messages. Options to choose from are 30, 60, 90,120, and Never.
Click the Apply button to accept the changes made.
The fields that can be configured for DDP Port Settings are described below:
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
State
Select this option to enable or disable DDP port state.
Click the Apply button to accept the changes made.