Dell Force10 MXL Blade - View CAM-ACL Settings

Content Addressable Memory (CAM) | 111
Figure 7-1. Command Example: test cam-usage
View CAM-ACL Settings
View the current cam-acl settings for the system chassis and each component using the show cam-acl
command (Figure 7-2).
Figure 7-2. View CAM-ACL settings
FTOS#test cam-usage service-policy input pmap stack-unit all
Stack-Unit | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status
------------------------------------------------------------------------------------------
2 | 0 | L2ACL | 28 | 1 | Allowed (28)
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 6
Ipv4Acl : 2
Ipv6Acl : 0
Ipv4Qos : 2
L2Qos : 1
L2PT : 0
IpMacAcl : 0
VmanQos : 0
VmanDualQos : 0
EcfmAcl : 0
FcoeAcl : 0
iscsiOptAcl : 2
-- Stack unit 5 --
Current Settings(in block sizes)
L2Acl : 6
Ipv4Acl : 2
Ipv6Acl : 0
Ipv4Qos : 2
L2Qos : 1
L2PT : 0
IpMacAcl : 0
VmanQos : 0
VmanDualQos : 0
EcfmAcl : 0
FcoeAcl : 0
iscsiOptAcl : 2
FTOS#