Dell Force10 MXL Blade - Related Configuration Tasks

GARP VLAN Registration Protocol (GVRP) | 207
Figure 11-2. GVRP Configuration Overview
Basic GVRP configuration is a two-step process:
1. Enabling GVRP Globally
2. Enabling GVRP on a Layer 2 Interface.
Related Configuration Tasks
• Configuring GVRP Registration
• Configuring a GARP Timer
VLANs 10-20
VLANs 10-20
VLANs 30-50
VLANs 70-80
VLANs 70-80
VLANs 30-50
GVRP is configured globally
and on all VLAN trunk ports
for the edge and core switches.
Edge Switches
Core Switches
Edge Switches
NOTES:
VLAN 1 mode is always fixed and cannot be configured
All VLAN trunk ports must be configured for GVRP
All VLAN trunk ports must be configured as 802.1Q