Dell Force10 MXL Blade - Displaying FIP Snooping Information

FIP Snooping | 195
Displaying FIP Snooping Information
Use the show commands in Table 10-1 to display information on FIP snooping.
Table 10-1. Displaying FIP Snooping Information
Command Output
show fip-snooping sessions [interface vlan
vlan-id] (Figure 10-3)
Displays information on FIP-snooped sessions on all VLANs or a specified
VLAN, including the ENode interface and MAC address, the FCF
interface and MAC address, VLAN ID, FCoE MAC address and FCoE
session ID number (FC-ID), worldwide node name (WWNN) and the
worldwide port name (WWPN). Information on NPIV sessions is also
displayed.
show fip-snooping config (Figure 10-4) Displays the FIP snooping status and configured FC-MAP values.
show fip-snooping enode [enode-mac-address]
(Figure 10-5)
Displays information on the ENodes in FIP-snooped sessions, including
the ENode interface and MAC address, FCF MAC address, VLAN ID and
FC-ID.
show fip-snooping fcf [fcf-mac-address]
(Figure 10-6)
Displays information on the FCFs in FIP-snooped sessions, including the
FCF interface and MAC address, FCF interface, VLAN ID, FC-MAP
value, FKA advertisement period, and number of ENodes connected.
clear fip-snooping database interface vlan
vlan-id {fcoe-mac-address | enode-mac-address
| fcf-mac-address}
Clears FIP snooping information on a VLAN for a specified FCoE MAC
address, ENode MAC address, or FCF MAC address, and removes the
corresponding ACLs generated by FIP snooping.
show fip-snooping statistics [interface vlan
vlan-id | interface port-type port/slot | interface
port-channel port-channel-number]
(Figure 10-7 and Figure 10-8)
Displays statistics on the FIP packets snooped on all interfaces, including
VLANs, physical ports, and port channels.
clear fip-snooping statistics [interface vlan
vlan-id | interface port-type port/slot | interface
port-channel port-channel-number]
Clears the statistics on the FIP packets snooped on all VLANs, a specified
VLAN, or a specified port interface.
show fip-snooping system (Figure 10-9) Display information on the status of FIP snooping on the switch (enabled
or disabled), including the number of FCoE VLANs, FCFs, ENodes, and
currently active sessions.
show fip-snooping vlan (Figure 10-10) Display information on the FCoE VLANs on which FIP snooping is
enabled.