546 | Stacking
www.dell.com | support.dell.com
Figure 31-1. Four Stacked MXL 10/40GbE Switches
Stack Management Roles
The stack elects the management units for the stack management:
• Stack master: primary management unit
• Standby: secondary management unit
The master holds the control plane and the other units maintain a local copy of the forwarding databases.
From Stack master you can configure:
• System-level features that apply to all stack members
• Interface-level features for each stack member
The master synchronizes the following information with the standby unit:
• Stack unit topology
• Stack running Configuration (which includes ACL, LACP, STP, SPAN, etc.)
• Logs
The master switch maintains stack operation with minimal impact in the event of:
• Switch failure
• Inter-switch stacking link failure
• Switch insertion
• Switch removal
10GbE LAN Uplinks
(LAG)
40GbE Stack Links
Master Switch
Standby Switch
Member Switches
To Next Page
Loading...
