Dell Force10 MXL Blade - Monitor RADIUS; Tacacs; Configuration Task List for TACACS

Security | 489
To view the configuration of RADIUS communication parameters, use the show running-config command in
EXEC Privilege mode.
Monitor RADIUS
To view information on RADIUS transactions, use the following command in EXEC Privilege mode:
TACACS+
FTOS supports the terminal access controller access control system (TACACS+) client, including support
for login authentication.
Configuration Task List for TACACS+
The following list includes the configuration task for TACACS+ functions:
• Choose TACACS+ as the Authentication Method
• Monitor TACACS+
• TACACS+ Remote Authentication and Authorization
• TACACS+ Remote Authentication and Authorization
• Specify a TACACS+ Server Host
radius-server key [encryption-type] key CONFIGURATION Configure a key for all RADIUS communications
between the system and RADIUS server hosts.
•
encryption-type: Enter 7 to encrypt the
password. Enter 0 to keep the password as plain
text.
• key: Enter a string. The key can be up to 42
characters long. You cannot use spaces in the
key.
radius-server retransmit retries CONFIGURATION Configure the number of times FTOS retransmits
RADIUS requests.
•
retries range: 0 to 100. Default is 3 retries.
radius-server timeout seconds CONFIGURATION Configure the time interval the system waits for a
RADIUS server host response.
• seconds range: 0 to 1000.
Default is 5 seconds.
Command Syntax Command Mode Purpose
debug radius
EXEC Privilege View RADIUS transactions to troubleshoot
problems.
Command Syntax Command Mode Purpose