Dell Force10 MXL Blade - Copy Configuration Files Using SNMP

Simple Network Management Protocol (SNMP) | 525
Copy Configuration Files Using SNMP
Use SNMP from a remote client to:
• copy the running-config file to the startup-config file
• copy configuration files from the Dell Force10 system to a server
10.16.130.140 [10.16.130.140]: Trap SNMPv2-MIB::sysUpTime.0 = Timeticks:
(645746) 1:47:37.46, SNMPv2-MIB::snmpTrapOID.0 = OID: IF-MIB::linkDown,
IF-MIB::ifIndex.45420801 = INTEGER: 45420801,
SNMPv2-SMI::enterprises.6027.3.1.1.4.1.2 = STRING: "OSTATE_DN: Changed interface
state to down: Te 0/44", SNMPv2-SMI::enterprises.6027.3.6.1.1.2.0 = INTEGER: 22
ets ETS peer state enabled
10.16.130.140 [10.16.130.140]: Trap SNMPv2-MIB::sysUpTime.0 = Timeticks:
(625916) 1:44:19.16, SNMPv2-MIB::snmpTrapOID.0 = OID:
SNMPv2-SMI::enterprises.6027.3.15.4.0.3,
SNMPv2-SMI::enterprises.6027.3.15.4.1.1.0 = INTEGER: 45158657,
SNMPv2-SMI::enterprises.6027.3.15.4.1.2.0 = INTEGER: 1,
SNMPv2-SMI::enterprises.6027.3.15.4.0 = STRING:
"ETS_TRAP_TYPE_PEER_STATE_CHANGE: ETS Peer state changed to enabled for port Te
0/43", SNMPv2-SMI::enterprises.6027.3.6.1.1.2.0 = INTEGER: 17
ETS peer state disabled
10.16.130.140 [10.16.130.140]: Trap SNMPv2-MIB::sysUpTime.0 = Timeticks:
(645772) 1:47:37.72, SNMPv2-MIB::snmpTrapOID.0 = OID:
SNMPv2-SMI::enterprises.6027.3.15.4.0.3,
SNMPv2-SMI::enterprises.6027.3.15.4.1.1.0 = INTEGER: 45420801,
SNMPv2-SMI::enterprises.6027.3.15.4.1.2.0 = INTEGER: 2,
SNMPv2-SMI::enterprises.6027.3.15.4.0 = STRING:
"ETS_TRAP_TYPE_PEER_STATE_CHANGE: ETS Peer state changed to disabled for port Te
0/44", SNMPv2-SMI::enterprises.6027.3.6.1.1.2.0 = INTEGER: 23
pfc pfc peer state enabled
10.16.130.140 [10.16.130.140]: Trap SNMPv2-MIB::sysUpTime.0 = Timeticks:
(626100) 1:44:21.00, SNMPv2-MIB::snmpTrapOID.0 = OID:
SNMPv2-SMI::enterprises.6027.3.15.4.0.7,
SNMPv2-SMI::enterprises.6027.3.15.4.1.1.0 = INTEGER: 45420801,
SNMPv2-SMI::enterprises.6027.3.15.4.1.2.0 = INTEGER: 1,
SNMPv2-SMI::enterprises.6027.3.15.4.0 = STRING:
"PFC_TRAP_TYPE_PEER_STATE_CHANGE: PFC Peer state changed to enabled for port Te
0/44", SNMPv2-SMI::enterprises.6027.3.6.1.1.2.0 = INTEGER: 21
pfc peer state disbled
10.16.130.140 [10.16.130.140]: Trap SNMPv2-MIB::sysUpTime.0 = Timeticks:
(645794) 1:47:37.94, SNMPv2-MIB::snmpTrapOID.0 = OID:
SNMPv2-SMI::enterprises.6027.3.15.4.0.7,
SNMPv2-SMI::enterprises.6027.3.15.4.1.1.0 = INTEGER: 45420801,
SNMPv2-SMI::enterprises.6027.3.15.4.1.2.0 = INTEGER: 2,
SNMPv2-SMI::enterprises.6027.3.15.4.0 = STRING:
"PFC_TRAP_TYPE_PEER_STATE_CHANGE: PFC Peer state changed to disabled for port Te
0/44", SNMPv2-SMI::enterprises.6027.3.6.1.1.2.0 = INTEGER: 24
Table 30-2. Dell Force10 Enterprise-specific SNMP Traps
Command Option Trap