Dell Force10 MXL Blade Configuration Guide

Standards Compliance | 673
General IPv4 Protocols
RFC# Full Name
791 Internet Protocol
792 Internet Control Message Protocol
826 An Ethernet Address Resolution Protocol
1027 Using ARP to Implement Transparent Subnet Gateways
1035 DOMAIN NAMES - IMPLEMENTATION AND
SPECIFICATION (client)
1042 A Standard for the Transmission of IP Datagrams over IEEE
802 Networks
1191 Path MTU Discovery
1305 Network Time Protocol (Version 3) Specification,
Implementation and Analysis
1519 Classless Inter-Domain Routing (CIDR): an Address
Assignment and Aggregation Strategy
1542 Clarifications and Extensions for the Bootstrap Protocol
1812 Requirements for IP Version 4 Routers
2131 Dynamic Host Configuration Protocol
2338 Virtual Router Redundancy Protocol (VRRP)
3021 Using 31-Bit Prefixes on IPv4 Point-to-Point Links
3046 DHCP Relay Agent Information Option
3069 VLAN Aggregation for Efficient IP Address Allocation
3128 Protection Against a Variant of the Tiny Fragment Attack

Dell Force10 MXL Blade Specifications

General

Switching Capacity	1.28 Tbps
Forwarding Rate	952 Mpps
Product Type	Blade Switch
Latency	< 3 microseconds
Operating Temperature	0°C to 40°C (32°F to 104°F)
Redundancy	Yes
Management	CLI, SNMP, Web
Layer Support	Layer 2, Layer 3
Jumbo Frame Support	Up to 9216 bytes
Management Ports	1 x 10/100/1000 Mbps
Storage Temperature	-40°C to 70°C
Weight	4.5 kg (9.9 lbs)