Dell Force10 MXL Blade - Content Addressable Memory (CAM); Overview; CAM Profile Commands; Important Points to Remember

Data Center Bridging (DCB) | 145
Table 8-3. show interface pfc summary Command Description
Field Description
Interface Interface type with stack-unit and port number.
Admin mode is on
Admin is enabled
PFC Admin mode is on or off with a list of the configured PFC priorities.
When PFC admin mode is on, PFC advertisements are enabled to be sent and
received from peers; received PFC configuration takes effect.
The admin operational status for a DCBX exchange of PFC configuration is
enabled or disabled.
Remote is enabled, Priority list
Remote Willing Status is
enabled
Operational status (enabled or disabled) of peer device for DCBX exchange of
PFC configuration with a list of the configured PFC priorities.
Willing status of peer device for DCBX exchange (Willing bit received in
PFC TLV): enabled or disabled.
Local is enabled DCBX operational status (enabled or disabled) with a list of the configured
PFC priorities.
Operational status (local port) Port state for current operational PFC configuration:
Init: Local PFC configuration parameters were exchanged with peer.
Recommend: Remote PFC configuration parameters were received from peer.
Internally propagated: PFC configuration parameters were received from
configuration source.
PFC DCBX Oper status Operational status for exchange of PFC configuration on local port: match
(up) or mismatch (down).
State Machine Type Type of state machine used for DCBX exchanges of PFC parameters:
Feature - for legacy DCBX versions; Symmetric - for an IEEE version.
TLV Tx Status Status of PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application Priority TLV:
FCOE TLV Tx Status
Status of FCoE advertisements in application priority TLVs from local DCBX
port: enabled or disabled.
Application Priority TLV:
ISCSI TLV Tx Status
Status of ISCSI advertisements in application priority TLVs from local DCBX
port: enabled or disabled.
Application Priority TLV:
Local FCOE Priority Map
Priority bitmap used by local DCBX port in FCoE advertisements in
application priority TLVs.
Application Priority TLV:
Local ISCSI Priority Map
Priority bitmap used by local DCBX port in ISCSI advertisements in
application priority TLVs.
Application Priority TLV:
Remote FCOE Priority Map
Status of FCoE advertisements in application priority TLVs from remote peer
port: enabled or disabled.
Application Priority TLV:
Remote ISCSI Priority Map
Status of iSCSI advertisements in application priority TLVs from remote peer
port: enabled or disabled.
PFC TLV Statistics:
Input TLV pkts
Number of PFC TLVs received.