34 | Configuration Fundamentals
www.dell.com | support.dell.com
• except displays text that does not match the specified text. Figure 2-10 shows this command used in
combination with the
do show stack-unit all stack-ports all pfc details | except 0 command.
Figure 2-10. Filtering Command Outputs with the except Command
• find displays the output of the show command beginning from the first occurrence of specified text
Figure 2-11 shows this command.
Figure 2-11. Filtering Command Outputs with the find Command
• no-more displays the output all at once rather than one screen at a time. This is similar to the terminal
length
command except that the no-more option affects the output of the specified command only.
•
save copies the output to a file for future reference.
Note: You can filter a single command output multiple times. The save option should be the last option
entered. For example:
FTOS# command | grep regular-expression | except regular-expression | grep
other-regular-expression | find regular-expression | save
FTOS(conf)#do show stack-unit all stack-ports all pfc details | except 0
Admin mode is On
Admin is enabled
Local is enabled
Link Delay 45556 pause quantum
stack unit 1 stack-port all
Admin mode is On
Admin is enabled
FTOS(conf)#do show stack-unit all stack-ports all pfc details | find 0
stack unit 0 stack-port all
Admin mode is On
Admin is enabled
Local is enabled
Link Delay 45556 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
stack unit 1 stack-port all
To Next Page
Loading...
