Dell PowerConnect B-RX - Displaying 802.1 X Information; Displaying 802.1 X Configuration Information

982 BigIron RX Series Configuration Guide
53-1002253-01
Displaying 802.1x information
33
Clearing a dot1x-mac-session for a MAC address
You can clear the dot1x-mac-session for a specified MAC address, so that the Client with that MAC
address can be re-authenticated by the RADIUS server. For example,
BigIron RX# clear dot1x mac-session 00e0.1234.abd4
Syntax: clear dot1x mac-session <mac-address>
Displaying 802.1x information
You can display the following 802.1x-related information:
• Information about the 802.1x configuration on the device and on individual ports
• Statistics about the EAPOL frames passing through the device
• Information about 802.1x-enabled ports dynamically assigned to a VLAN
• Information about the user-defined and dynamically applied Mac address and IP ACLs
currently active on the device
• Information about the 802.1x multiple client configuration
Displaying 802.1x configuration information
To display information about the 802.1x configuration on the BigIron RX device, enter the following
command.
Syntax: show dot1x
The following table describes the information displayed by the show dot1x command.
BigIron RX# show dot1x
PAE Capability : Authenticator Only
system-auth-control : Enable
Number of ports enabled : 25
re-authentication : Disable
global-filter-strict-security: Enable
quiet-period : 60 Seconds
tx-period : 30 Seconds
supptimeout : 30 Seconds
servertimeout : 30 Seconds
maxreq : 3
re-authperiod : 3600 Seconds
Protocol Version : 1
auth-fail-action : Block Traffic
MAC Session Aging : All
MAC Session Max Age : 120 Seconds
Maximum Failed Attempts : 3