Dell PowerConnect B-RX - MAC Port Security

1370 BigIron RX Series Configuration Guide
53-1002253-01
Security/Management
E
MAC port security
mac-authentication max-age <seconds> “Specifying the aging time for blocked MAC
addresses” on page 935
mac-authentication move-back-to-old-vlan disable |
port-configured-vlan | port-restrict-vlan |
system-default-vlan
“Specifying to which VLAN a port is moved after its
RADIUS-specified VLAN assignment expires” on
page 933
mac-authentication no-override-restrict-vlan “Configuring dynamic VLAN assignment” on
page 930
mac-authentication save-dynamicvlan-to-config “Saving dynamic VLAN assignments to the running
configuration file” on page 934
show auth-mac-address <mac-address> | <ip-address> |
<portnum>
“Displaying multi-device port authentication
information for a specific MAC address or port” on
page 939
show auth-mac-address configuration “Displaying multi-device port authentication
configuration information” on page 936
show auth-mac-address detail “Displaying multi-device port authentication
configuration information” on page 936
show auth-mac-address “Displaying authenticated MAC address information”
on page 936
show auth-mac-addresses authorized-mac “Displaying the authenticated MAC addresses” on
page 940
show auth-mac-addresses unauthorized-mac “Displaying the non-authenticated MAC addresses”
on page 940
Commands See ...
age <minutes> “Setting the MAC Port Security age timer” on
page 951
autosave <minutes> “Autosaving secure MAC addresses to the
startup-config” on page 950
enable “Enabling the MAC Port Security feature” on
page 948
“Manually re-enabling a interface” on page 956
maximum <number-of-addresses> “Setting the maximum number of secure MAC
addresses for an interface” on page 949
port security “Enabling the MAC Port Security feature” on
page 948
restrict-max-deny <number> “Restricting interface access” on page 952
secure <mac-address> “Specifying static secure MAC addresses” on
page 950
show mac [all] “Displaying a list of MAC addresses” on page 959
show port security <module> | <portnum> “Displaying MAC Port Security settings” on page 956
show port security mac “Displaying the secure MAC addresses list on the
device” on page 957
Commands See ...