1376 BigIron RX Series Configuration Guide
53-1002253-01
System parameters
E
System parameters
logging buffered <level> | <num-entries> “Disabling logging of a message level” on page 1296
“Changing the number of entries the local buffer can
hold” on page 1297
logging console “Enabling real-time display of Syslog messages” on
page 1290
logging facility <facility-name> “Changing the log facility” on page 1297
logging host <ip-addr> | <server-name> “Specifying a Syslog server” on page 1295
“Specifying an additional Syslog server” on
page 1295
logging on [<udp-port>] “Disabling or re-enabling Syslog” on page 1295
show logging “Displaying the Syslog configuration” on page 1291
terminal monitor “Enabling real-time display of Syslog messages” on
page 1290
Commands See ...
Commands See ...
banner <delimiting-character> | [motd
<delimiting-character>]
“Setting a message of the day banner” on page 128
banner exec_mode
<delimiting-character>
“Setting a privileged EXEC CLI level banner” on
page 128
banner incoming
<delimiting-character>
“Displaying a message on the console when an
incoming Telnet session is detected” on page 129
broadcast limit <number> “Configuring CLI banners” on page 127
clock set <hh:mm:ss> <mm-dd-yy> | <mm-dd-yyyy> “Setting the system clock” on page 126
clock summer-time “Setting the system clock” on page 126
clock timezone gmt gmt | us <time-zone> “Setting the system clock” on page 126
hostname <string> “Entering system administration information” on
page 117
ip telnet source-interface
ethernet <portnum> |
loopback <num> |
ve <num>
“Configuring an interface as source for all Telnet
packets” on page 122
logging enable user-login “Disabling the Syslog messages and traps” on
page 122
mac-age-time <age-time> “Changing the MAC age time” on page 136
multicast limit <number> “Configuring CLI banners” on page 127
route-only “Enabling or disabling Layer 2 switching” on
page 133
router bgp | dvmrp | ospf | pim | rip | vrrp | vrrpe “Enabling or disabling routing protocols” on page 130
To Next Page
Loading...
