Dell PowerConnect B-RX - Displaying Ipv6 Traffic Statistics

1116 BigIron RX Series Configuration Guide
53-1002253-01
Displaying global IPv6 information
43
Displaying IPv6 traffic statistics
To display IPv6 traffic statistics, enter the following command at any CLI level.
Send: total unacknowledged sequence number = <number> The total number of unacknowledged sequence
numbers sent by the local router.
Send: total used buffers <number> The total number of buffers used by the local
router in setting up the TCP connection.
Receive: initial incoming sequence number = <number> The initial incoming sequence number received by
the local router.
Receive: expected incoming sequence number = <number> The incoming sequence number expected by the
local router.
Receive: received window = <number> The size of the local router’s receive window.
Receive: bytes in receive queue = <number> The number of bytes in the local router’s receive
queue.
Receive: congestion window = <number> The size of the local router’s receive congestion
window.
TABLE 182 Specific IPv6 TCP connection fields (Continued)
This field... Displays...