1184 BigIron RX Series Configuration Guide
53-1002253-01
Displaying BGP4+ information
45
Syntax: show ipv6 bgp peer-group [<peer-group-name>]
The display shows only parameters that have values different from their default settings.
Displaying BGP4+ summary
To view summary BGP4+ information for the switch, enter the following command at any level of
the CLI.
Syntax: show ipv6 bgp summary
This display shows the following information:
TABLE 208 BGP4+ summary information
This field... Displays...
Router ID The switch’s router ID.
Local AS Number The BGP4+ AS number in which the switch resides.
Confederation Identifier The AS number of the confederation in which the switch resides.
BigIron RX# show ipv6 bgp peer-group peer1
1 BGP peer-group is pg1, Remote AS: 65002
Description: device group 1
NextHopSelf: yes
Address family : IPV4 Unicast
Address family : IPV4 Multicast
Address family : IPV6 Unicast
Members:
IP Address: 192.169.102.2
IP Address: 192.169.100.2
IP Address: 192.169.101.2
IP Address: 192.169.103.2
IP Address: 192.169.104.2
IP Address: 192.169.105.2
IP Address: 192.169.106.2
IP Address: 192.169.107.2
IP Address: 192.169.108.2
IP Address: 192.169.109.2
IP Address: 192.169.110.2
IP Address: 192.169.111.2
IP Address: 192.169.112.2
BigIron RX# show ipv6 bgp summary
BGP4 Summary
Router ID: 223.223.223.223 Local AS Number : 65001
Confederation Identifier : not configured
Confederation Peers:
Maximum Number of Paths Supported for Load Sharing : 1
Number of Neighbors Configured : 1
Number of Routes Installed : 2
Number of Routes Advertising to All Neighbors : 2
Number of Attribute Entries Installed : 1
Neighbor Address AS# State Time Rt:Accepted Filtered Sent ToSend
2000:4::110 65002 ESTAB 21h32m32s 0 0 2 0
To Next Page
Loading...
