1366 BigIron RX Series Configuration Guide
53-1002253-01
Security/Management
E
RADIUS
SNMP access
Commands See ...
aaa accounting commands <privilege-level> default
start-stop radius | none
“Configuring RADIUS accounting for CLI commands”
on page 109
aaa accounting exec default
start-stop radius | none
“Configuring RADIUS accounting for Telnet/SSH
(Shell) access” on page 109
aaa accounting system default start-stop radius | none “Configuring RADIUS accounting for system events”
on page 109
aaa authentication enable
implicit-user
“Configuring Enable authentication to prompt for
password only” on page 106
aaa authentication login
privilege-mode
“Entering privileged EXEC mode after a Telnet or SSH
login” on page 106
aaa authorization commands <privilege-level> default
radius | none
“Configuring command authorization” on page 107
aaa authorization exec default radius | none “Configuring Exec authorization” on page 107
enable aaa console “Command authorization and accounting for console
commands” on page 108
radius-server host <ip-addr> | <server-name> [auth-port
<number> acct-port <number> [authentication-only |
authorization-only | accounting-only | default] [key
<string>]]
“Identifying the RADIUS server to the BigIron RX” on
page 104
“Specifying different servers for individual AAA
functions” on page 104
radius-server key [0 | 1] <string> “Setting the RADIUS key” on page 105
radius-server retransmit <number> “Setting the retransmission limit” on page 90
radius-server timeout <number> “Setting the timeout parameter” on page 105
show aaa “Displaying RADIUS configuration information” on
page 110
Commands See ...
snmp-client <ip-addr> “Restricting SNMP access to a specific IP address”
on page 67
snmp-server community <string>
ro | rw <standard-acl-name> | <standard-acl-id>
“Using ACLs to restrict SNMP access” on page 65
snmp-server enable vlan <vlan-id> “Restricting SNMP access to a specific VLAN” on
page 68
snmp-server enable “Disabling SNMP access” on page 70
To Next Page
Loading...
