EasyManua.ls Logo

Dell PowerConnect B-RX - Modifying Probe Interval

Dell PowerConnect B-RX
1458 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BigIron RX Series Configuration Guide 653
53-1002253-01
Configuring DVMRP
23
Modifying graft retransmit time
The Graft Retransmit Time defines the initial period of time that a router sending a graft message
will wait for a graft acknowledgement from an upstream router before re-transmitting that
message.
Subsequent retransmissions are sent at an interval twice that of the preceding interval. Possible
values are from
5 – 3600 seconds. The default value is 10 seconds.
To modify the setting for graft retransmit time to 120, enter the following.
BigIron RX(config-dvmrp-router)# graft 120
Syntax: graft-retransmit-time <5-3600>
Modifying probe interval
The Probe Interval defines how often neighbor probe messages are sent to the
ALL-DVMRP-ROUTERS IP multicast group address. A router’s probe message lists those neighbor
DVMRP routers from which it has received probes. Possible values are from 5 – 30 seconds. The
default value is 10 seconds.
To modify the probe interval setting to 10, enter the following.
BigIron RX(config-dvmrp-router)# probe 10
Syntax: probe-interval <5-30>
Modifying report interval
The Report Interval defines how often routers propagate their complete routing tables to other
neighbor DVMRP routers. Possible values are from 10 – 2000 seconds. The default value is 60
seconds.
To support propagation of DVMRP routing information to the network every 90 seconds, enter the
following.
BigIron RX(config-dvmrp-router)# report 90
Syntax: report-interval <10-2000>
Modifying trigger interval
The Trigger Interval defines how often trigger updates, which reflect changes in the network
topology, are sent. Example changes in a network topology include router up or down or changes in
the metric. Possible values are from 5 – 30 seconds. The default value is 5 seconds.
To support the sending of trigger updates every 20 seconds, enter the following.
BigIron RX(config-dvmrp-router)# trigger-interval 20
Syntax: trigger-interval <5-30>
Modifying default route
This defines the default gateway for IP multicast routing.
To define the default gateway for DVMRP, enter the following.

Table of Contents

Other manuals for Dell PowerConnect B-RX

Related product manuals